In this article, we will show you complete of NordicTrack T Series Treadmills 6.5S and 6.5Si Models Black Friday Deals 2019. This post keep you updated with latest features.
NordicTrack T Series Treadmills 6.5S and 6.5Si Models Black Friday Deals 2019
NordicTrack to show this is how treadmills are packaged it really doesn’t matter what brand you get model they all pretty much look the same and assembly of all treadmills are pretty much the same very slight differences between different makes and models and things like that so here we go it’s all on box I normally keep this part in the box along with the covers until I’m ready for them so this is what you get and these are there’s somebody parks here
what’s in the box the council and first step feeding the wire through the upright that’s so you can connect it to the console next you want to ground it here sometimes and most of them there’s a screw all here already just remove that screw it’s a throwaway screw as what I call them I was just for doing the packaging and the shipping that they put screws in that holes so I want some of these treadmills they’re screws that will be left over because they’re screws you’re taking out and put in the screws that’s in the hardware package then you connect the base I’d only just hand tighten these first to get them into the thread when I’m training someone on how to assemble the treadmill one thing I always remind them sometimes the instructions do not mention it what’s easy to look over are these covers to go here to cover up those screws if you figured to do this part and end up getting half the machine the treadmill put together you have to take up a lot of parts apart to put these on so but I don’t normally always tell my guys after they do that do this part check the box to make sure they have these covers and make sure they get those on first before moving any further these arms are very different now I’m not very different but they can be different from different model treadmills sometimes you put them on now and the way you put them on can be different but these two screws you want to like I said put them in with your fingers just for hand tighten at first and these two screws here will come out and they will be throwaway screws because their screws in the package that will replace these so these are some of those throw these screws that I were talking about I’m going to remove two screws three screws in here normally – I’m going to take this off this is going to go here and it’s going to screw in here and here that two new screws that’s the place where those throwaway screws work there you go let’s now connect it and I always tell my guys when I’m training if you’re using power tools when you’re putting these two screws in do not go crazy with it and over tighten this will crack and break so you don’t want to go crazy with it if you’re using power tools to tighten these screws up now we’re going to add the tray – and again do not over tighten these screws take your time you don’t have to go crazy with it if you over tighten them you could break the plastic or damage the plastic so the trees are in so now I’m going to connect this here then I’ll be able to attach the screws back here attached here here hope this cable up here to here and last thing I’ll be doing will be connecting this hydraulic to the bottom and done okay I’m all done but the customers still not home yet close and not attract T 6.5 s I say the customers at home yet that is another example of why this service is needed and how the service can help you out customers still coming home from work and they come home to an assemble treadmill I don’t have to worry about us I’m gonna try no they can come home and work out if they want instead of a similar knit so you got your head Rock here just want to push up a little bit foot here let it come down so about that part and you can remove your foot and nice smooth drop and one thing I like to do before I go over everything with the customer turn it on turn it at the highest speed look good yeah the reason why I say turn it on to the highest feed that’s what I find is when you get the most movement in the belt just just to see if you need to adjust the belt and you really can’t see it but there’s a hole here there’s one on this side to adjust the roller here if you need to for the belt so I’m going to turn it up to the highest speed to see if we get any brother there’s no rubbing but I’m going to adjust the belt just a little because big gap here no gap over there so I’m gonna just about just a little bit long as you don’t have it rubbing and digging into the plastic here you’re good to go but I’m just going to adjust a little bit so it looks a little better check the incline and the last thing I like to check is the safety switch.