Microscopes

OMAX 40X 2000X Lab LED Binocular Microscope Black Friday Deals 2019

OMAX 40X 2000X Lab LED Binocular Microscope Black Friday Deals 2019
Written by blackfridayadmin

This article is all about for the OMAX 40X 2000X Lab LED Binocular Microscope Black Friday Deals 2019. Check out the latest update.

OMAX 40X 2000X Lab LED Binocular Microscope Black Friday Deals 2019

OMAX 40X 2000X Lab LED Binocular Microscope Black Friday Deals 2019

today I’ll show you how to assemble and adjust a m82 yes Oh max microscope once you receive your package tube they’ll open the carton box carefully using a knife or a paper cutter inside you should have a cushion letter it has a link to the instruction manual make sure to keep it unto not discarded now take out the Styrofoam container in the box now make sure that the to find the up sign with the arrow pointing upward on the Styrofoam container and open it you need to cover very gently and carefully take all the pieces out and place them on a flat and firm surface in your package you should have a microscope body the final color had two sets of eyepieces a head lock thumb screw then might already be in place on the microscope body immersion oil power adapter color filter and a dust cover so now you’re ready to assemble the microscope first I’ll start with the buy ocular head simply remove the cap on the microscope body and screw the head block thumb screw in very loosely just a little bit now take the wine ocular head and remove the cap and insert the head in the body like this make sure that it’s seated completely and tied into head lock thumb screw now none of the eyepieces and it’s very important to make sure to remove the caps on the eyepiece tubes and simply take pair of five pieces and place them into two now take the power cord I’m hugg the power cord in the power socket at backup to the microscope and in the power outlet turn the switch on and the assembly of the microscope is now complete before using the microscope you need to make some adjustment so before doing that let’s start with placing the specimen on the stage usually you want to use a slide that is not included in the package of the microscope but you can purchase them separately or so let’s take a slide in order to place it first you want to lowers the stage to its minimum height using the coarse focus adjustment off place the slide on the stage and gently secure it using the side holder you want to make sure that the slide is placed right underneath the objective by using the X&Y; adjustment knob now you want to adjust the interpupillary distance while observing through the eyepieces hold both eyepiece tubes and slide in and out when the distance is correct you left and right field if you should converge it to a single one that is you’ll see a single image instead of two now you also want to adjust the ocular diopter so first place the ten times objective into position and note the interpupillary distance rotate the diopter ring to both diopter rings to that number so in my case I have 59 as my interpupillary distance so I simply turn the dial to rank to that number so that the white dot points to 59 and I do the same on the left-hand side now close one of your eye let’s say the left one and use your right eye only get the image to be focused using the coarse and fine focus of adjustment knobs once you get it close your right eye and use your left eye only now this time do not touch the focus adjustment knobs but only the diopter ring adjust it until you get the image focus now specimen like the firs inside so you might want to use different objectives such as D forty times or the hundred times before using them make sure that the spring nose smoothly and is not stuck the proper way of focusing is to start using the ten times objector now use the course and find focus adjustment knobs once you get the image focus under the ten times objective you can turn the 40 times objective into position now only use the fine focus adjustment knob get the image focus for the hundred times objectives the same procedure applies however you also need to use the immersion oil in order to do this simply rotate the revolving nosepiece so that the observing position is right between the 40 and hundred times objectives and add one drop of immersion oil on the slide but now turn three hundred times objectives into position and he’s the fine focus adjustment knobs to get the image focused in order to get the optimum conditions for your observation um you can also adjust the condenser and move it up or down depending on the objectives you’re using so if you’re using higher power objectives you should raise the condenser and lower it when using the four ten times objectives you can also change the size of the aperture by moving the our stock fry and finally the brightness using the intensity dial you can also change the color using a color filter and simply place it in the filter holder and slide it under the condenser now once you’re done make with your observation you need to clean the 100 times objective and the slides immediately so simply use a nice paper that is also not included in the microscope and clean it very gently like this just make sure that there’s no more oil on the objective plants and also disguise so when you’re using the hundred times objective that you have to use it with the oil but when using and make sure that the 40 times that does not require the oil is dry and does not touch the oil but it was it will damage the objective now if you want to use another the other pair of eyepieces simply removed kind I piece it and change plays d20 time into ipas2 if you want to use a camera that’s simply remove one of the eyepiece and place the camera into the eyepiece – now that you have everything style you can enjoy observing under your eye matey – yes Oh max microscope you

About the author

blackfridayadmin

Leave a Comment